Advanced Search
Brass
Trumpets
Piccolo trumpet, C, B-flat, A
Maker: Yamaha
Date: 1982
Place Made:Hamamatsu, Japan, Asia
Model: YTR 9910
Serial No: 010031
SignedStamped on leadpipe: YAMAHA Custom / JAPAN
MarkingsStamped on right side of second valve casing: YAMAHA / JAPAN
Stamped on left side of third valve casing: YTR 9910 / 010031
Stamped in first valve casing: 1
Stamped on spring stems, respectively: 1 / M, 2 / M, 3 / M, and 4 / M
Stamped on left side of third valve casing: YTR 9910 / 010031
Stamped in first valve casing: 1
Stamped on spring stems, respectively: 1 / M, 2 / M, 3 / M, and 4 / M
DescriptionSilver-plated brass, mother-of-pearl finger buttons, straight, detachable bell, telescopic tuning slide at leadpipe with ligature screw, main tuning slide at bell tubing with ligature screw, four Périnet valves (lowering pitch by a whole tone, a semitone, a minor third, and a fourth), top-sprung, spring inside hollow stem, alignment by two unequal plastic lugs on spring anchor plate, nickel-plated brass pistons, two single water keys at third and fourth valve slides, windway 1-2-3-4.
One telescopic tuning slide for leadpipe (C)
Two additional slides to elongate bell (B-flat and A)
One additional valve slide each for first and third valves
"Custom" is the highest-grade trumpet line of Yamaha, "M" indicates medium bore. This model was only made in the year 1982.
One telescopic tuning slide for leadpipe (C)
Two additional slides to elongate bell (B-flat and A)
One additional valve slide each for first and third valves
"Custom" is the highest-grade trumpet line of Yamaha, "M" indicates medium bore. This model was only made in the year 1982.
DimensionsHeight: 486 mm
Tube length: 508 mm, 524 mm, 576 mm, 626 mm
Bore diameter (initial, bell slide, valve slides): 11 mm, 11.3 mm, 11.3 mm (0.445 inches)
Bore diameter (leadpipe tuning slides for C, initial, minimum): 11 mm, 9.8 mm
Bore diameter (bell tuning slide for B-flat, initial, minimum): 12.5 mm, 11.8 mm
Bore diameter (bell tuning slide for A, initial, minimum): 12.4 mm, 11.7 mm
Bell diameter: 99 (4 inches)
Tube length: 508 mm, 524 mm, 576 mm, 626 mm
Bore diameter (initial, bell slide, valve slides): 11 mm, 11.3 mm, 11.3 mm (0.445 inches)
Bore diameter (leadpipe tuning slides for C, initial, minimum): 11 mm, 9.8 mm
Bore diameter (bell tuning slide for B-flat, initial, minimum): 12.5 mm, 11.8 mm
Bore diameter (bell tuning slide for A, initial, minimum): 12.4 mm, 11.7 mm
Bell diameter: 99 (4 inches)
ProvenancePurchased from Osmun Brass Instruments, Belmont, Massachusetts, 1989.
Terms
Credit Line: Joe R. and Joella F. Utley Collection, 1999
Not on view
Object number: 06972