Skip to main content
Electric guitar
Electric guitar
Electric guitar

Electric guitar

Maker (trade name of Sears, Roebuck & Co.)
Date1939/05/11
Place MadeChicago, Illinois, United States, North America
ModelSupertone Amplified Spanish guitar, Grand Concert size, 12 D 2293
Serial No.3024 22 94 (or batch number)
SignedDecal on head: SUPERTONE
MarkingsRubber-stamped in black ink on inside of back, below bass f-hole, and on inside of top near bass f-hole, over white cotton cloth glued to inside of top: 3024 22 94
Rubber-stamped in purple ink on inside of back below bass f-hole, inside rectangle: S-39 [Spring 1939]
Rubber-stamped in black in on underside of pickup housing: MAY 11 1939
Die-stamped on underside of potentiometer: CFX2144 2MEG LIN 137654
DescriptionBy the late 1930s, electric guitars were becoming more mainstream, with less expensive versions sold through mail order catalogs like Sears and Montgomery Ward. This $67.50 Harmony electric guitar sold through Sears, Roebuck & Co. has a cheaper build quality for the body, but the pickup is well made and the design technologically advanced for its time.

Stringing: six steel strings
Soundboard: pressed, arched, two-piece, quarter-cut spruce: wide grain
Back: pressed, arched one-piece maple plywood with inked marks in imitation of narrow curl
Ribs: two-piece, slab-cut maple with inked marks in imitation of narrow curl
Head and neck: maple
Heel cap: none
Binding: white celluloid
Fingerboard: rosewood; 19 nickel-silver frets; mother-of-pearl dots behind 5th, 9th, and 15th frets; two mother-of-pearl dots behind 7th and 12th fret; single white celluloid side dots behind 5th, 7th, 9th, 12th and 15th frets
Nut: bone
Bridge: two-piece rosewood (compensated) with nickel-plated screws for height adjustment
Tailpiece: nickel-plated steel trapeze shape, secured to lower rib with four nickel-plated steel slotted flat head screws
Tuners: two nickel-plated worm gear tuner sets with white celluloid heads
Endpin: missing
Soundholes: f-holes without binding
Pick guard: black celluloid, mounted on guitar with nickel-plated steel bracket and two nickel-plated steel Philip’s head screws
Pickup: electromagnetic pickup incorporating a U-magnet with one pole joined to a metal bar, through which three screws extend into three coils to function as pole pieces. Three further screws through the coil are height-adjustable under the strings. The opposite pole of the U-magnet is in contact with a steel bar mounted closer to the bridge, magnetizing that portion of the strings with the opposite polarity, a feature found on several 1930s pickup designs. The pickup is built into a maple rectangular plate with rounded corners and dark-brown-varnished edges. This plate is affixed with two brass screws into a larger maple box with a U-shaped cutaway, which is in turn mounted on the main maple strut extending between the neck and end blocks. The pickup is covered with a nickel-plated brass plate secured to the maple mounting plate with two nickel-plated screws. The volume control is mounted in the lower treble bout and has a nickel-plated brass, cast knob. See photos in file.
Lacquer: dark red-brown sunburst with craquelure
Linings: kerfed maple
Neck block: masonite with beveled edges
End block: masonite with beveled edges
Top bracing: spruce longitudinal bars between f-holes
Grafts: none
Other: linen glued to inside of top around f-holes; three linen strips glued on inside of back at upper center and lower bouts; large maple strut between upper and lower blocks, with maple block mounts above and below strut, glued to each block, pickup mounted above strut in maple block
DimensionsTotal guitar length: 1004 mm (39 17/32″)
Back length: 491 mm (19-5/16″)
Upper bout width: 278 mm (12-19/32″)
Waist width: 232 mm (10-15/16″)
Lower bout width: 375 mm (14-3/4″)
Rib height (including edging) at heel: 83 mm (3-1/4″)
Rib height, at waist: 84 mm (3-3/16″)
Rib height, at end block: 87 mm (3-5/16″)
Head length: 163 mm (6-13/32″)
Head width, top: 71 mm (2-25/32″)
Head width, bottom: 60 mm (2-3/8″)
Neck length (nut to ribs): 354 mm (13-15/16″)
Neck width, nut: 43 mm (1-11/16″)
Neck width, heel: 56 mm (2-3/16″)
Soundhole length: 153 mm (6-1/32″)
Vibrating string length (nut to bridge edge): high E: 642 mm (25-1/4″); low E: 644 mm (25-11/32″)
Credit LinePurchase funds gift of Jean M. Abramson Estate, 2008
Object number13570
On View
Not on view
Electric mandola
Vivi-Tone Company
1932-1933 ca.
Electric mando-cello
Vivi-Tone Company
1932-1933 ca.
Electric guitar
Vivi-Tone Company
1934-1935 ca.
Electric guitar
Vivi-Tone Company
1936-1939 ca.
Electric banjoline
Vega Company
1957 ca.
Electric soprano ukulele
Stringnet (HK) Co., Ltd
2007-2010 ca.
We use cookies to ensure we give you the best experience on our website. By continuing to use this site or by closing or clicking "I agree", you agree to the use of cookies. I agree