Skip to main content

Guitar

Date1913
Place MadeTopeka, Kansas, United States, North America
Place MadeChicago, Illinois, United States, North America
ModelStyle B11 / Style B No. 1 Professional Model
Serial No.3004
SignedPrinted on glossy paper label, with photograph portrait of Albert Shutt enclosed in oval on left side: Shutt Professional Instrument / Fully Guaranteed / Made During Month of [line drawn in pencil] 19["13" written in pencil] / Model ["B11" written in pencil] No. ["3004" written in pencil] / THE SHUTT MANDOLIN-GUITAR CO. / Topeka, Kansas, U. S. A. / Patented March 8, 1910 Sept. 19, 1911 / Other Patents Pending

Neck block stamped in purple ink: MANUFACTURED BY / THE HARMONY CO. / CHICAGO, ILL. / U.S.A. / B11
DescriptionShutt's models were the first archtop guitars and mandolins with f-shaped soundholes made in the US, pre-dating Gibson's introduction of the F-5 and L-5 mandolin and guitar models by at least 14 years.

One of only two Shutt guitars known to survive.

Stringing: six steel strings
Soundboard: arched, two-piece, quarter-cut spruce: fine-to-medium grain
Back: slightly arched, two-piece, quarter-cut sycamore
Ribs: two-piece, quarter-cut sycamore bent sides; upper ribs carved from single piece of sycamore, integral with top block; separate 8 mm piece at joint between upper rib and top
Head and neck: Spanish cedar or mahogany with brown-dyed hardwood center strip; head veneered in black-dyed hardwood or ebony
Heel cap: rosewood
Binding: ivoroid on top only
Fingerboard: red-brown-stained hardwood bound in ivoroid; 19 nickel-silver T-frets under lower three strings, 21 nickel-silver frets under upper three strings; mother-of-pearl dots behind 5th, 7th, 10th, 15th, and 17th frets; three mother-of-pearl dots behind 12th fret, the outer two smaller; brass side dots behind 5th, 7th, 10th, and 12th frets; fingerboard floats over top after 16th fret
Nut: bone; later
Bridge: uncompensated ebony
Tailpiece: nckel-plated sheet brass, covered on face with arched ebony with bevels at each end, secured to lower rib with three nickel-plated steel domed, slot head screws
Tuners: nickel-plated steel six-gear worm-gear machine head with brass rollers and ivoroid heads
Endpin: ebony with mother-of-pearl eye
Soundholes: f-holes without binding
Pick guard: black celluloid with circular cutout over upper f-hole eye, mounted on guitar with ebony bracket and nickel-plated steel screw
Lacquer: black with cracquelure on top; medium orange-brown on back and sides with slight sunburst
Linings: kerfed light hardwood
Neck block: integral with upper ribs; sycamore
End block: light hardwood
Top bracing: two spruce longitudinal braces between f-holes, fanned slightly from upper to lower bouts
DimensionsTotal guitar length: 959 mm (37-3/4″)
Back length (end of heel to center of lower back): 441 mm (17-3/8″)
Upper bout width: 303 mm (11-15/16″)
Waist width: 230 mm (9-1/16″)
Lower bout width: 357 mm (14-1/16″)
Rib height (including edging) at heel: 57 mm (2-1/4″)
Rib height, at waist: 56 mm (2-3/16″)
Rib height, at end block: 56 mm (2-3/16″)
Head length: 163 mm (6-13/32″)
Head width, top: 71 mm (2-13/16″)
Head width, bottom: 62 mm (2-7/16″)
Neck length (nut to ribs): 353 mm (13-29/32″)
Neck width, nut: 45 mm (1-25/32″)
Neck width, heel: 55 mm (2-5/32″)
Soundhole length: 122 mm (4-13/16″)
Vibrating string length (nut to bridge edge): 630 mm (24-13/16″)
ProvenanceSkinner Auction Online 3406T, Lot #1026, ending on 7/14/2020.
Purchase funds gift of Sue and Larry Sheets, St. Paul, MN, 2020.
Published Referenceshttps://www.harpguitars.net/history/shutt/shutt.htm
Credit LinePurchase funds gift of Sue and Larry Sheets, 2020
Object number15570
On View
Not on view
Mandolin
Shutt Mandolin-Guitar Co.
1913
Mandolin
Albert Burton Shutt
1909-1911 ca.
Mandolin
Orville Gibson
1903
Guitar
Orville Gibson
1902
Mandolin
Gibson Mandolin-Guitar Company
1906 ca.
Guitar
Gibson, Inc.
1937
We use cookies to ensure we give you the best experience on our website. By continuing to use this site or by closing or clicking "I agree", you agree to the use of cookies. I agree