Advanced Search
Kit
Alternate name:Pochette
Alternate name:Dancing masters' fiddle
Maker: Thomas Perry
Date: 1770-1781 ca.
Place Made:Dublin, Ireland, Europe
Model: none
Serial No: none
SignedBranded at top of the back of the body: PERRY / DUBLIN
Markingsnone
DescriptionThis unusual oval-shaped kit, or dancing master's fiddle, bears the brand of the Perry family of Dublin. Instruments such as these were easily transported for the instruction of dance, a required social skill for middle and upper class Europeans of the period.
Top: one-piece, quarter-cut spruce: medium grain; not inset at neck heel
Back: one-piece, quarter-cut maple: narrow, irregular, horizontal curl
Ribs: quarter-cut maple: narrow curl angled to right; one-piece
Head and neck: maple: plain; pegbox terminates without scroll; hole drilled in upper end of pegbox for suspending via fiber thread or rope
Purfling: double painted lines
Varnish: light orange
Fingerboard: ebony; wedge shaped; channeled under neck position; ebony wedges on each side at joint with neck; relatively flat profile
Nut: ebony
Tailpiece: ebony; tailgut passes through holes drilled in face; bevelled lower end
Tailgut: plain gut
Pegs: four boxwood; undercut heads; short stems
Saddle: ebony; low profile; set into top; finished with same varnish as body
Endpin: ebony
F-holes: strongly curved wings; flared, angled stems
Linings: spruce
Top block: spruce; iron screw with flat slot-head through top block into neck heel
Bottom block: spruce
Top: one-piece, quarter-cut spruce: medium grain; not inset at neck heel
Back: one-piece, quarter-cut maple: narrow, irregular, horizontal curl
Ribs: quarter-cut maple: narrow curl angled to right; one-piece
Head and neck: maple: plain; pegbox terminates without scroll; hole drilled in upper end of pegbox for suspending via fiber thread or rope
Purfling: double painted lines
Varnish: light orange
Fingerboard: ebony; wedge shaped; channeled under neck position; ebony wedges on each side at joint with neck; relatively flat profile
Nut: ebony
Tailpiece: ebony; tailgut passes through holes drilled in face; bevelled lower end
Tailgut: plain gut
Pegs: four boxwood; undercut heads; short stems
Saddle: ebony; low profile; set into top; finished with same varnish as body
Endpin: ebony
F-holes: strongly curved wings; flared, angled stems
Linings: spruce
Top block: spruce; iron screw with flat slot-head through top block into neck heel
Bottom block: spruce
DimensionsTotal kit length: 428 mm
Back length: 232 mm
Upper bout width: 72 mm
Lower bout width: 85 mm
Rib height: 19-20 mm
Stop length: 149 mm
Vibrating string length: 280 mm
Neck length (bottom of nut to ribs): 129 mm
Back length: 232 mm
Upper bout width: 72 mm
Lower bout width: 85 mm
Rib height: 19-20 mm
Stop length: 149 mm
Vibrating string length: 280 mm
Neck length (bottom of nut to ribs): 129 mm
ProvenancePurchased in 1980 from Wurlitzer-Bruck, New York, New York.
Terms
Credit Line: Board of Trustees, 1980
Not on view
Object number: 02674