Advanced Search
Trumpet, B-flat
Maker: Antoine Courtois
Date: 1997
Place Made:Paris / Amboise, France, Europe
Model: Evolution II
Serial No: 032 (033)
SignedStamped on leadpipe: Antoine Courtois Paris / EVOLUTION. II
MarkingsStamped on left side of second valve casing: A. COURTOIS / PARIS / 032
Stamped on flat brace between leadpipe and bell: 7
Stamped on valve stems: 033
Stamped on valve stems, respectively: 1, 2, 3
Stamped on flat brace between leadpipe and bell: 7
Stamped on valve stems: 033
Stamped on valve stems, respectively: 1, 2, 3
DescriptionBrass, satin finish, nickel-silver (outer slides, valve stems), bell over bell (outside bell cut open on right, both bells sharing one rim), single loop, leadpipe with gap regulator and movable sound post (two telescoping tubes with spring), main tuning slide at first bow, three Périnet valves (1, ½, 1½), top-sprung, spring inside hollow stem, alignment by one lug on plastic spring anchor plate, nickel-silver-plated brass pistons, single water key at main tuning slide, trigger with pull-ring at first valve and with pull-ring and "easy ball stop" (protruding ball with spring in short tube) at third valve, windway 3-2-1.
Silver mouthpiece covered with brass mantle.
The Evolution II model is a continental European reaction to the heavy-style Monette trumpet. The second bell has the purpose to neutralize the lateral vibration of the main bell to channel the sound outward. The movable sound post between leadpipe and the inner bell follows the idea that the position of this brace influences the quality of the sound. The gap regulator at the beginning of the leadpipe is based on the idea that the size of the gap between the end of the mouthpiece and the beginning of the narrowing step in the leadpipe also influences the sound. The covered mouthpiece is modelled after heavy mouthpieces by David Monette.
Silver mouthpiece covered with brass mantle.
The Evolution II model is a continental European reaction to the heavy-style Monette trumpet. The second bell has the purpose to neutralize the lateral vibration of the main bell to channel the sound outward. The movable sound post between leadpipe and the inner bell follows the idea that the position of this brace influences the quality of the sound. The gap regulator at the beginning of the leadpipe is based on the idea that the size of the gap between the end of the mouthpiece and the beginning of the narrowing step in the leadpipe also influences the sound. The covered mouthpiece is modelled after heavy mouthpieces by David Monette.
DimensionsHeight: 481 mm
Tube length: 1297 mm
Bore diameter (initial, minimum, tuning slide, valve slide): 11 mm, 8.8 mm, 11.7 mm, 11.75 mm
Bell diameter: 125 mm
Tube length: 1297 mm
Bore diameter (initial, minimum, tuning slide, valve slide): 11 mm, 8.8 mm, 11.7 mm, 11.75 mm
Bell diameter: 125 mm
ProvenancePurchased in 1997 from the Woodwind & Brasswind Company, South Bend, Indiana.
Terms
Credit Line: Joe R. and Joella F. Utley Collection, 1999
Not on view
Object number: 07236