Skip to main content
Electric guitar
Electric guitar
Electric guitar

Electric guitar

Date1970-1972 ca.
Place MadeHradec Králové, Czechoslovakia, Europe
ModelSpecial; double-cutaway hollow- body thin-line electric
Serial No.9078
SignedGold decal on head: Special
MarkingsStamped into back of head near low E-tuner: 9078
DescriptionA new guitar factory was built in Hradec Králové in 1959. Guitars produced there quickly found a market all over Europe, and were even exported to the West under a variety of brand names. The Special was an especially fancy, hollow-body electric, with three pickups and classic European, red and black sunburst finish. The endpin can be unscrewed to access a mini screwdriver for adjustments to the guitar’s components.

Top: arched maple plywood
Back: arched maple plywood
Sides: maple
Head: maple; integral with head; nickel-plated steel truss rod cover; nickel-plated steel wire string guide
Neck: maple; truss rod adjustable at lower end
Binding: white celluloid on front and back
Fingerboard: red-brown hardwood bound in white celluloid; 22 nickel-silver frets (including zero fret); single plastic imitation mother-of-pearl dots behind the 3rd, 5th, 7th, 9th, 15th, 17th, 19th, and 21st frets; double plastic imitation mother-of-pearl dots behind the 12th fret; black plastic side dots behind 3rd, 3rd, 5th, 7th, 9th, 12th, and 15th frets
Nut: aluminum
Bridge: nickel-plated brass with height adjustment screws
Tailpiece: nickel-plated brass and nickel-plated steel with tremolo bar (imitation Bigsby); engraved geometric decoration on lower end of main fixture; ends of string holder covered with silver sparkle plastic
Pegs: six on one side, nickel-plated brass plate, brass gears, blackened steel rollers, and ivory plastic heads
Strap button: nickel-plated brass, affixed to nickel-plated brass plate at back of neck joint
Endpin: steel screw with nickel-plated brass head; unscrews to and removes to be used as screwdriver for adjusting bridge height
Pickup configuration: three single-coil pickups; nickel-plated brass and black plastic pickup covers
Controls: two nickel-plated brass volume and two nickel-plated brass tone knobs; four nickel-plated brass rocker switches
Pick guard: black plastic
Soundhole: Single f-hole bound in white celluloid
Finish: dark red to black sunburst lacquer
DimensionsTotal guitar length: 1061 mm
Body length (neck to end): 485 mm
Upper bout width: 282 mm
Waist width: 241 mm
Lower bout width: 407 mm
Body thickness: 40 mm
Head length: 190 mm
Head width, top: 56 mm
Head width, bottom: 76 mm [measured at the widest point on the treble side]
Neck length (nut to end of neck tenon): 411 mm
Neck width, nut: 41 mm
Neck width, end of neck tenon: 52 mm
Vibrating string length (nut to saddle edge): high E: 641 mm; low E: 647 mm
ProvenanceGift of Michael Cwach, 2013
Credit LineGift of Michael Cwach, 2013
Object number14765
On View
Not on view
Electric guitar
Fender Musical Instruments Corporation
1986
Electric guitar
Jolana, Československé Hudební Nástroje (Czechoslovak Music Instruments)
1963 ca.
Electric guitar
Gibson, Inc.
1958-1967
Electric bass guitar
Semie Moseley
1968
Guitar
John D'Angelico
1960
Electric banjoline
Vega Company
1957 ca.
We use cookies to ensure we give you the best experience on our website. By continuing to use this site or by closing or clicking "I agree", you agree to the use of cookies. I agree