Skip to main content
Hammered dulcimer
Hammered dulcimer
Hammered dulcimer

Hammered dulcimer

Date1850-1900 ca.
Place MadeUnited States, North America
Modelnone
Serial No.none
Signednone
MarkingsScratched into paint on back side of dulcimer: HYLAND & Co.
Black lettering on white paper pieces, adhered to both sides of treble bridge (low to high): G A B C D E F G A B C D
Black lettering on white paper pieces, adhered to one side of bass bridge (low to high): D B A G C D F
Black lettering on white paper piece, adhered to additional bass bridge: [indecipherable]
Description12 triple-strung treble courses; 7 plus 1 double-strung bass courses (additional bass course is between the 10/11 treble courses, which is likely later based on the dissimilarity to the other tuning/hitch pins); trapezoidal with sloping pin blocks, wrest/tuning pins to the right; 18 wooden plugs screw-machine made insert pins (wood screws) on backside (9 per side, in random placement near angled edges) and various other plugs around perimeter of case; painted dark green over yellow (possibly over original varnish?); nuts of iron wire; carpenter tacks pounded into case through surface edges; handle screwed to longest edge of case; two circular soundholes; side pieces of even thickness but the outer edge is beveled at an oblique angle to the back/baseboard
Pine (?) soundboard.
One-piece treble bridge and one-piece bass bridge both crenellated with an iron wire set into top; individual block bridge for additional bass string (later); braces directly beneath bridges on underside of soundboard, bass brace extends the length of the bass bridge.
52 tuning pins; 51 hitch pins – some continuous stringing, such that not all hitch pins are used
Small metal bracket near hitch pins on left side with evidence of wear – unknown use. The placement would suggest it was some sort of anchor for a lid string/stop; however, there is little evidence of hinges, save for a missing portion of at center of top case molding
DimensionsBottom: 42-1/4 in (1073 mm)
Top: 20-1/2 in (520 mm)
Angled sides: 18-1/2 in (470 mm)
Depth: 1-3/4 to 2-3/4 in (45 to 70 mm)
ProvenanceArne B. Larson Collection, Vermillion, South Dakota, 1979.
Credit LineArne B. Larson Collection, 1979
Object number02598
On View
Not on view
Salterio
Salvator Bofill
1760
Hammered dulcimer
1850-1875 ca.
Hammered dulcimer
1885-1910 ca.
Chitarra battente
1680-1730 ca.
Hammered dulcimer
1865-1875 ca.
Upright piano
John Broadwood & Sons
1870 ca.
We use cookies to ensure we give you the best experience on our website. By continuing to use this site or by closing or clicking "I agree", you agree to the use of cookies. I agree